Checking/Changing/

Cancelling Timer

Settings (Timer List) (For

RDR-AT100/AT200)

HDD +RW -RWVR-RWVideo +R

-RVR-RVideo

You can check, change, or cancel timer settings using the Timer List.

1 Press TIMER.

The “Timer List” display appears. When all of the timer settings are not visible on the display, press M/m to view the hidden timer settings.

2 Select the timer setting you want to check/change/cancel, and press ,.

The sub-menu appears.

3 Select an option, and press ENTER.

“Modify”:

Changes the timer setting.

Select an item using </, and adjust using M/m. Select “OK,” and press

ENTER.

“Erase”:

Erases the timer setting. Select “Yes,” and press ENTER.

“Skip Once”:

Cancels the daily or weekly recordings only once. After cancelling the timer setting, “Skip Once” appears next to the timer setting in the Timer List.

To change or cancel the setting, repeat steps 2 and 3 above.

When the timer settings overlap

•The programme that starts first has priority and the entire programme is recorded.

•After finishing the previous recording, the other recording starts with several tens-of- second’s delay (when the end-time of one recording and the start-time of another are the same).

•When the recordings start at the same time, only one of them will be recorded. Cancel the timer setting for the programme that you are not going to record.

zHint

You can move to the first row/bottom row of the Timer List using ./> while the list is displayed.

bNotes

•When “VPS/PDC” is set to “On” for one or more timer recordings, the start times may change in the event of a broadcast delay or early start.

•Even if the timer is set, timer recordings cannot be made while recording a programme that has priority.

62