Progressive

When you connect a progressive format TV to this recorder using the COMPONENT VIDEO OUT jacks, select “Compatible.”

Standby Mode (page 118)

Select the mode for when the recorder is turned off.

“Mode 1” (default): No input signals are output when the recorder is in standby mode.

“Mode 2”: Input signals are output

when the recorder is in standby mode. When you select “Mode 1,” the display asks for confirmation. Select “Yes(Mode 2)” or “No(Mode 1).”

HDD caution messages

Read the HDD caution messages, and press ENTER.

4 Select “Finish Setup” using M/m, and press ENTER.

“Easy Setup” is completed.

Go to “Setting up the GUIDE Plus+® system (RDR-AT105/AT107/AT205 only)” (page 26) to use the Gemstar GUIDE Plus+ electronic programme guide.

To return to the previous step

Press O RETURN.

zHint

If you want to run “Easy Setup” again, select “Easy Setup” in the “Basic” setup from “Initial Setup” in the System Menu (page 118).

Setting up the GUIDE Plus+® system (RDR-AT105/AT107/ AT205 only)

Follow the instructions below to set up the GUIDE Plus+ system and use the connected set top box receiver.

1 Press GUIDE.

The GUIDE Plus+ system “Basic Setup” appears.

2 Select an item using M/m, and press

ENTER. Then set each item.

Language

Select a language for the on-screen displays using M/m, and press ENTER.

Country

Select a country/area using M/m, and press ENTER.

Postal Code

Enter your postal code using </M/m/ ,, and press ENTER.

If “Country” is set to “Others,” you cannot enter a postal code and the GUIDE Plus+ system will not search for a host channel.

If you do not need to set up the GUIDE Plus+ system, press SYSTEM MENU to exit.

Even if you cannot use the GUIDE Plus+ system where you live, you can still set up a manual recording. See “Setting the timer manually (Schedule)” on page 54.

26