ASCART input jack
When setting “LINE 3 Out” to
BVideo input jack
You will enjoy standard quality images.
CS VIDEO input jack
You will enjoy high quality images.
DComponent video input jacks (Y, PB/ CB, PR/CR)
You will enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and set “Progressive” to “Compatible” in the “Easy Setup” setup (page 25). Then set “Component Video Out” to “Progressive” in the “Video In/Out” setup to send progressive video signals. For details, see “Component Video Out” on page 122.
EHDMI input jack
Use a certified HDMI cord to enjoy high quality digital picture and sound through the HDMI OUT jack.
When connecting a Sony TV that is compatible with the “Control for HDMI” function, see page 20.
To see the signals from the connected set top box receiver when the set top box receiver is connected to the recorder using a SCART cord only, turn the recorder on.
When connecting to the HDMI jack
Follow the steps below. Improper handling may damage the HDMI jack and the connector.
1Carefully align the HDMI jack on the rear of the recorder and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted.
Connector is upside | Not straight |
down |
|
2Insert the HDMI connector straight into the HDMI jack.
Do not bend or apply pressure to the HDMI connector.
bNotes
•Be sure to disconnect the HDMI cord when moving the recorder.
•Do not apply too much pressure to the cabinet wall, if you place the recorder on the cabinet with the HDMI cord connected. It may damage the HDMI jack or the HDMI cord.
•Do not twist the HDMI connector while connecting to or disconnecting from the HDMI jack to avoid damaging the HDMI jack and connector.
When playing “wide screen” images
Some recorded images may not fit your TV screen. To change the picture size, see page 128.
If you are connecting to a VCR
Connect your VCR to the LINE 1/ DECODER jack on the recorder (page 29).
Settings and Hookups
,continued 19