To fix the set top box controller to your set top box receiver

Once you have confirmed that the set top box controller controls your set top box receiver, fix it in place.

1Remove the backing on the double- sided tape.

2Attach it so that the set top box controller is directly above the remote control sensor on your set top box receiver.

To change the basic GUIDE Plus+ settings

1Press GUIDE.

2Select “Setup” in the Menu Bar using M/ ,, and press ENTER.

3Select “Basic Setup” using M/m, and press ENTER.

4Repeat from step 2 of “Setting up the GUIDE Plus+® system (RDR-AT105/ AT107/AT205 only)” on page 26.

28