Timer Recording (For RDR-AT100/AT200)

HDD +RW -RWVR-RWVideo+R

-RVR-RVideo

You can set the timer for a total of 32 programmes (8 programmes when using the VPS/PDC function), up to 30 days in advance.

Set the date, time, and programme position of the programme manually.

Before you start recording…

•Check that the disc has enough available space for the recording (page 39). For the HDD, DVD+RWs, and DVD-RWs, you can open up disc space by erasing titles (page 75).

•Adjust the recording picture quality if necessary (page 113).

1

2

Press TIMER.

The “Timer List” display appears.

Select the “New Input” row, and press ENTER.

xREC STOP

TIMER

</M/m/,,

ENTER

3 Select an item using </, and adjust using M/m. Then press

ENTER.

The adjustable items are listed below. “Pr/CH”: Sets the programme position. “Date”: Sets the date (up to 30 days later). Select a recording pattern by pressing M repeatedly to set the timer for the same daily or weekly programmes.

“Start”: Sets the start time.

“Stop”: Sets the stop time.

“Extend”: Sets duration when a timer recording is in progress. If the programme set to be recorded daily or weekly is extended, the manually extended time set here will be added to the subsequent timer recording times. Note that when “VPS/PDC” is set to “On,” you cannot make the “Extend” setting.

•If you make a mistake, select the item and change the setting.

58