To select a programme position quickly using the TV broadcast station logo

1Press the yellow button (“Channels”) while the GUIDE Plus+ system “Home Screen” is displayed.

2Select the TV broadcast station logo using </M/m/,, and press ENTER. The display returns to “Grid” and the programme currently being broadcast by the selected TV station is selected.

3Select a programme using </,, and press ENTER.

To confirm, change, or cancel a timer recording

See “Checking/Changing/Cancelling Timer Settings (Schedule) (For RDR-AT105/ AT107/AT205)” on page 60.

To stop recording during timer recording

Press x REC STOP.

Note that it may take a few seconds for the recorder to stop recording.

On-screen instructions may appear after pressing x REC STOP. In this case, follow the on-screen instructions.

Rec. Mode Adjust

If there is not enough available disc space for the recording, the recorder automatically adjusts the recording mode to enable the entire programme to be recorded. Set “Rec. Mode Adjust” to “On” in the “Recording” setup (page 127).

zHint

When you select “AUTO” for recording mode, the recorder automatically maximises the recording quality for the space available on the inserted disc (if recording to DVD), or to fit on to a blank DVD disc (if recording to HDD).

bNotes

•If a message indicating that the HDD is full appears on the screen, change the recording destination to “DVD,” or make available space for the recording (page 76).

•The last recording mode you selected manually becomes the default recording mode for timer recordings made from the GUIDE Plus+ system.

•You cannot adjust the recording quality (HDD or DVD) once the recording starts.

•The beginning of some recordings may not be made when using the VPS/PDC function.

•You cannot extend the recording duration time when “VPS/PDC” is selected (page 55).

•The “Rec. Mode Adjust” function only works with a timer recording to DVD, and the VPS/ PDC function set to off.

•The recording mode cannot be set to “AUTO” when “VPS/PDC” is set to “On.”

Setting the timer manually (Schedule)

1 Press SYSTEM MENU.

The System Menu appears.

2 Select “Timer Recording,” and press

ENTER.

3 Select “Timer Recording,” and press

ENTER.

The schedule list appears.

4 Press the green button (“Manual”).

54