bNotes

•When picture noise appears after you change the “Screen Resolution” setting, hold down x (stop) on the recorder, and press Z (open/close) on the recorder.

•When “Colour” is set to “YCbCr 4:2:2” in the “HDMI Output” setup, you cannot select “720 x 576i” (or “720 x 480i”).

4:3 Video Output

This setting is effective only when you set “TV Type” to “16:9” in the “Playback” setup.

Adjust this setting to watch 4:3 aspect ratio signals. If you can change the aspect ratio on your TV, change the setting on your TV, not this recorder.

Note that this setting is effective only for HDMI connection.

Full

Select this when you can

 

 

 

change the aspect ratio on

 

 

 

your TV.

 

 

 

 

 

 

Normal

Select this when you

 

 

 

cannot change the aspect

 

 

 

ratio on your TV. Shows a

 

 

 

4:3 size video with the

 

 

 

aspect ratio as it is.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16:9 aspect ratio TV

Colour

Selects the method of outputting video signals for the HDMI jack.

RGB (0-255)Outputs RGB (0-255) signals. Select this when connecting to an RGB (0- 255) device.

RGB (16-235)Outputs RGB (16-235) signals. Select this if colours appear overly rich and the black appears too deep.

YCbCr 4:2:2 Outputs 10-bit YCbCr 4:2:2 component signals.

YCbCr 4:4:4 Outputs 8-bit YCbCr 4:4:4 component signals.

bNotes

•Some settings may not be available depending on the connected device.

•When a DVI device is connected, you cannot select “YCbCr 4:2:2” or “YCbCr 4:4:4.”

•When “Screen Resolution” is set to “720 x 576i” (or “720 x 480i”) in the “HDMI Output” setup, you cannot select “YCbCr 4:2:2.”

Audio Output

Selects the type of audio signal output from the HDMI OUT jack.

Auto

Outputs Dolby Digital,

 

MPEG and DTS audio

 

signals as a bitstream

 

signal. Normally select

 

this position.

 

 

PCM

Converts all audio

 

signals except for DTS

 

signals to PCM.

 

 

Bitstream

Select this if the

Priority

connected device is

 

compatible with

 

bitstream audio.

 

 

bNotes

•The PCM signals may not be output even when you select “Auto” depending on the “Audio Out” settings, number of audio channels, and the HDMI-connected device.

•The “Audio Output” function is not available when a DVI device is connected.

Control for HDMI

On

Allows you to use the

 

“Control for HDMI”

 

function (page 20).

 

 

Off

Turns off the function.

 

 

Adjustments and Settings

131