The System Menu appears.
One-Touch Dubbing from HDD Camcorder (ONE-

TOUCH DUB)

HDD

You can dub contents of your HDD camcorder onto the HDD of the recorder with a single press of the ONE-TOUCH DUB button on the recorder.

When dubbing from the HDD camcorder for the first time, all of the contents are dubbed to the recorder. The next time, only newly shot sessions that have not been dubbed yet are dubbed to the recorder.

Follow steps 1 to 3 of “Preparing for HDD camcorder dubbing” on page 88, and press ONE-TOUCH DUB on the recorder.

The recorder starts dubbing the contents on the HDD camcorder to the HDD Title List of the recorder.

The recorder turns off automatically if you do not use the recorder for more than

20 minutes after the dubbing has finished.

To stop during dubbing

Press x REC STOP.

Note that it may take a few seconds for the recorder to stop dubbing.

bNotes

•The one-touch dubbing button on the HDD camcorder does not function with the recorder.

•In One-Touch Dubbing, the contents that have already been dubbed to the recorder cannot be dubbed again, even after you erase them from the recorder. To dub the same contents to the recorder again, dub the entire contents of the HDD camcorder (see “Dubbing from HDD Camcorder Using the On-Screen Display (HDD- Cam Dubbing)” on page 89).

•Data about the dubbed contents are all cleared when you reset the recorder (page 142).

•Even if the DV camcorder is also connected to the DV IN jack, dubbing from the HDD camcorder starts when you press the ONE- TOUCH DUB button.

Dubbing from HDD Camcorder Using the On- Screen Display (HDD- Cam Dubbing)

HDD

You can dub the contents of your HDD camcorder onto the HDD of the recorder using the on-screen display.

Methods to dub from the HDD camcorder include:

•Incremental Dubbing

The recorder automatically detects the contents recorded on the connected HDD camcorder, and starts dubbing from the contents following the last dubbed contents if there are contents that have already been dubbed.

•Full Dubbing

The recorder dubs all contents of the HDD camcorder, including the contents that have already been dubbed to the recorder.

1 Follow steps 1 to 3 of “Preparing for HDD camcorder dubbing” on page 88.

2 Press SYSTEM MENU.

3 Select “HDD-Cam/DV,” and press

ENTER.

4 Select “HDD-Cam Dubbing,” and press ENTER.

5 Select “Incremental Dubbing” or “Full Dubbing,” and press ENTER.

To dub newly shot contents only, select “Incremental Dubbing.”

To dub all contents of the HDD camcorder, select “Full Dubbing.” The display asks for confirmation.

Dubbing Camcorder HDD

,continued 89