The System Menu appears.

Dubbing an Entire DV

Format Tape (DV One-

Touch Dubbing)

HDD +RW -RWVR-RWVideo +R

-RVR-RVideo

You can record the entire contents of a DV/ Digital8 format tape onto a disc with a single press of the ONE-TOUCH DUB button on the recorder. The recorder controls the DV camcorder for the whole process, and completes the recording.

Follow steps 1 to 5 of “Preparing for DV camcorder dubbing” on page 91, and press ONE-TOUCH DUB on the recorder.

The recorder rewinds the tape and then starts recording the tape contents.

After the recording is finished, the recorder rewinds the tape in the DV camcorder, and finalises the recorded disc (except DVD- RW/DVD-R (VR mode)) automatically.

To stop during recording

Press and hold x REC STOP for more than 3 seconds.

Note that it may take a few seconds for the recorder to stop recording.

bNotes

•When a blank space between the recordings on the tape continues for more than two minutes, DV One-Touch Dubbing ends automatically.

•The recorder will pause recording when there is a blank space or an image containing copy protection signals on the tape. The recorder will resume recording automatically when receiving a recordable signal.

•Finalisation is cancelled if a timer recording starts (except for DVD-RW/DVD-R (VR mode)).

•DV One-Touch Dubbing ends automatically when there are images containing copy protection signals at the beginning of the tape.

•If the HDD camcorder is also connected to the USB jack, dubbing from the HDD camcorder starts when you press the ONE-TOUCH DUB button. Disconnect the HDD camcorder from the USB jack to dub from the DV camcorder.

Dubbing Selected

Scenes (DV Manual

Dubbing)

HDD +RW -RWVR-RWVideo +R

-RVR-RVideo

You can select and dub scenes while playing a DV/Digital8 format tape.

1 Follow steps 1 to 5 of “Preparing for DV camcorder dubbing” on page 91.

2 Press SYSTEM MENU.

3 Select “HDD-Cam/DV,” and press

ENTER.

4 Select “DV Manual Dubbing,” and press ENTER.

5 Select the recording destination, “Record to Hard Disk Drive” or “Record to DVD,” and press ENTER.

6 Press H.

The scene starts to play.

7 Find the point on the DV/Digital8 format tape that you want to start dubbing from using m/M or c/ C, and press X.

8 Select “Start Rec.,” and press

ENTER.

The recorder starts dubbing.

9 Select “Pause Rec,” and press

ENTER.

The recorder pauses dubbing.

10 Repeat steps 6 to 9 to dub more scenes.

11 Select “Stop Rec,” and press ENTER.

The selected scenes are dubbed as a single title.

To exit “DV Manual Dubbing”

Press SYSTEM MENU.

Dubbing Camcorder DV

,continued 93