YNR | Reduces noise contained in |
(luminance | the luminance element of the |
noise | video signal. |
reduction) |
|
|
|
BNR (block | Reduces “block noise” or |
noise | |
reduction) | picture. |
|
|
MNR | Reduces the faint noise |
(mosquito | appearing around the outlines |
noise | of the images. The noise |
reduction) | reduction effects are |
| automatically adjusted within |
| each setting range according |
| to the video bit rate and other |
| factors. |
|
|
Sharpness | Sharpens the outlines of the |
| images. |
|
|
Detail | Adjusts the sharpness of |
| images outlines. |
|
|
White | Adjusts the intensity of white. |
Enhancer |
|
|
|
Black | Adjusts the intensity of black. |
Enhancer |
|
|
|
Black | Selects the black level (setup |
Level | level) for the video signals. |
| Select “ON” to raise the black |
| level. Select this when the |
| picture appears too dark. |
| Select “OFF” to set the black |
| level of the input signals to the |
| standard level. Normally, |
| select this position. |
|
|
Gamma | Adjusts how dark areas look. |
Correction |
|
|
|
Hue | Adjusts the colour balance. |
|
|
Chroma | Makes the colours deeper or |
Level | lighter. |
|
|
bNotes
•If the outlines of the images on your screen become blurred, set “BNR” and/or “MNR” to “Off.”
•Depending on the disc or the scene being played, the above BNR or MNR effects may be hard to discern. Also, these functions may not work with some screen sizes.
•The following settings are not available for the signals output from the HDMI jack.
–“Sharpness”
–“White Enhancer”
–“Black Enhancer”
–“Black Level”
–“Gamma Correction”
–“Hue”
–“Chroma Level”
Adjustments and Settings
115