With this hookup, you can record any programme position on the set top box receiver.
To watch cable programmes, you need to match the programme position on the recorder to the aerial output programme position on the set top box receiver.
Place the set top box controller near the remote sensor on the set top box receiver.
Wall
| Set top box |
| controller |
Set top box | |
receiver |
|
ANT IN |
|
TO TV |
|
Aerial cable*1 | SCART cord*2 |
(not supplied) | (not supplied) |
|
to AERIAL IN
to
DVD recorder
to AERIAL OUT
Aerial cable | TV |
| |
(supplied) |
|
to aerial input
: Signal flow
*1 If your set top box receiver does not have an aerial output jack, connect the aerial cable to the recorder’s AERIAL IN jack.
*2 Connect only if your set top box receiver has a SCART connector.
If the set top box receiver can output RGB signals
This recorder accepts RGB signals. If the set top box receiver can output RGB signals, connect the TV SCART connector on the set top box receiver to the LINE 1/DECODER jack, and set “LINE 1 In” to “RGB” in the “Video In/Out” setup (page 123). Refer to the instructions supplied with the set top box receiver.
16