Input Line System

Selects the colour system when recording from the connected equipment.

NTSC

Records in NTSC or PAL-60

 

colour system.

 

 

PAL/

Records in PAL or SECAM

SECAM

colour system.

 

 

bNotes

•When picture noise appears after you change the “Input Line System” setting, change the “Input Colour System” setting (page 122). If picture noise still appears, hold down x (stop) on the recorder, and press INPUT on the recorder.

•When you change the “Input Line System” setting, the Dubbing List is erased.

Standby Mode

Mode 1 When the recorder is turned off,

–Input signals from the LINE 1/DECODER jack are not output from the LINE 3 – TV jack (page 29) and the connected external decoder cannot be used (page 32).

–Aerial input signals are not

output to the connected TV. To watch TV, use a splitter to divide aerial input signals between the TV and the recorder (page 15).

Mode 2 When the recorder is turned off, input signals from the LINE 1/DECODER jack are output from the LINE 3 – TV jack and aerial input signals are output to the connected TV. The standby power consumption is higher than that of “Mode 1.”

bNotes

•Even when “Standby Mode” is set to “Mode 1,” the following functions are available.

–Synchro-Recording.

–Timer setting with “VPS / PDC” in the schedule list or Timer List.

•The SMARTLINK features are not available when “Standby Mode” is set to “Mode 1.”

HELP Setting

On

Displays Help information for

 

GUI displays.

 

 

Off

Does not set to HELP setting

 

mode.

 

 

Easy Setup (Resetting the Recorder)

Select this to run the “Easy Setup” programme.

Follow the instructions for “Easy Setup” (page 25) from step 2.

Auto Power Off

On

The recorder automatically

 

turns off when you do not

 

press any buttons for 6 hours

 

in stop mode. The display asks

 

for confirmation about one

 

minute before the recorder

 

turns off. If you want to keep

 

the recorder on, press ENTER.

 

 

Off

Turns off the function.

 

 

118