4Band/stripes in black or color in the longitudinal direction (Figure 6.2- D )
•Is each LED head assembly connected to the junction board (Y71 PWB) correctly?
| No | Connect the LED head assembly to the junction board correctly. |
▼ | Yes | Check the cable connection, or replace the LED head assembly. Recovered? |
• | ||
| Yes | End |
▼ | No | Check the cable connection, or replace the junction board (Y71 PWB). Recovered? |
• | ||
| Yes | End |
▼
• No
No
▼
• Yes Yes
▼
• No
No
Is the engine board (K73 PWB) connected with the junction board (Y71 PWB) correctly? Connect the engine board with the junction board correctly.
Check the cable connection, or replace the engine board (K73 PWB). Recovered? End
Is each ID terminal connected to the contact assembly correctly? (See Figure 6.3.) Connect the ID terminals with the contact assembly correctly.
▼
• Yes
Notes:
Replace the ID unit.
1.When replacing the engine board (K73 PWB), demount the EEPROM chip from the old engine board and remount it on the new one.
2.In case the EEPROM chip is not replaced, see Item (2) in Sec. 6.5.2.
41388601TH Rev.2 | 121 / |
