7Cyclical printout defects (Figure 6.2- E )
Cycle | Defective Part | Solution |
3.71 in. | Image Drum | Replace the ID unit. |
1.95 in. | Developing Roller | Replace the ID unit. |
2.66in. | Toner Supply Roller | Replace the ID unit |
1.73 in. | Charge Roller | Replace the ID unit. |
4.45 in. | Fuser Roller | Replace the fuser unit. |
2.28 in. | Transfer Roller | Replace the belt cassette assembly. |
|
|
|
Note: After replacement of the ID unit, fuser unit or belt cassette unit, the corresponding counter will be reset.
41388601TH Rev.2 | 124 / |
