5.REGULAR MAINTENANCE
5.1Consumables to be Regulary Replaced
It is recommended that a user should replace the consumables below according to the replacement standard. (If not replaced, print quality is not assured or it may result in a failure.)
Part Name | Time for Replacement | Replacement Condition | Adjustment after Replacement |
|
|
|
|
When the message “Toner Low” | After 15,000 copies have | Replace the Toner cartridge. | |
Toner Cartridge | is displayed. | been printed. |
|
|
|
|
|
|
|
|
|
ID Cartridge | When the message “Drum Life” | After 26,000 copies have | Reset the drum counter |
| is displayed. | been printed. (at 3P/J) | after drum replacement. |
|
|
|
|
Fuser Unit | When the message “Fuser Life” | After 80,000 copies have | Reset the fuser counter. |
| is displayed. | been printed. |
|
|
|
|
|
Belt Unit | When the message “Belt Life” is | After 80,000 copies have | Reset the belt counter. |
| displayed. | been printed. (at 3P/J) |
|
|
|
|
|
The above consumables replacement may be performed by a user.
5.2Cleaning
The inside and outside of this printer should be cleaned with a hand vacuum cleaner, if necessary.
Note: Do not touch the Image drum terminal, LED lens array and LED head connectors.
5.3Cleaning of LED Lens Array
When a longitudinal white band or stripes (that is, void or light printing) appear on a printed paper surface, the LED lens array should be cleaned.
Note: The LED head cleaner must be used to clean the LED lens array. (The LED head cleaner is included in the Toner cartridge box.)
White band, white stripes (Void or light printing)
5.4Cleaning of Pick-up Roller
When papers are not fed normally, the
Note: Clean it with a soft cloth and alcohol. Be cautious not to damage the roller surface.
41388601TH Rev.2 | 98 / |
