5Tape remaining time indicator

If qREMAIN on the DISPLAY SET menu has been set to ON, the tape remaining time is displayed.

Note

If the tape has been rewound to the beginning, this indicator will not show the tape remaining time when the tape is inserted into the unit. The tape remaining time is displayed after the tape runs for a while.

6Search/Index indicator

Displays the search mode. If an index has been marked, this displays INDEX MARK. If you use the end search function, this displays END SEARCH.

7Warning indicators Displays a warning.

For details on warnings, see “Alarm Messages” on page 94 (GB).

8PAL (DSR-50)/NTSC (DSR-50P) indicator DSR-50: Appears for five seconds when you play back a PAL formatted tape.

DSR-50P:Appears for five seconds when you play back a NTSC formatted tape.

9DVCAM/DV indicator

In the EE, recording, and duplicate modes, displays the DVCAM/DV select switch setting. During playback, displays the format recorded on the tape.

0Audio mode indicator

In the EE and recording modes, displays the selected audio mode in AUDIO MODE on the AUDIO SET menu. During playback and audio dubbing, displays the audio mode recorded on the tape. When inputting signals from the DV IN/OUT connector, displays the audio mode input from the DV IN/OUT connector.

qa Input signal indicator

Displays the INPUT SELECT selector setting.

qs NS (Non Standard) audio mode indicator

Lights when you play back a tape in the unlock audio mode or when the unlock mode signal has been input from the DV IN/OUT connector. Always lights if the DVCAM/DV select switch has been set to DV and the unit is in the EE mode.

For details on the unlock mode, see “Compatibility of DVCAM and DV Format” on page 99 (GB).

qd Program AE indicator

qf White balance indicator

qg Gain indicator

qh Iris indicator

qj Shutter speed indicator

qk SteadyShot indicator

Notes

•Data items qd through qk show the settings (camera data) of the tape recorded by the camera (DSR-200/ 200P, 200A/200AP, PD100/PD100P, PD100A/ PD100AP, PD150/PD150P, etc.). This unit cannot record camera data.

•Data items qd through qk are displayed only when DATA CODE on the DISPLAY SET menu has been

set to CAMERA.

For details on DATA CODE, see “DISPLAY SET menu” on page 84 (GB).

ql Date indicator

Displays the date when the tape was recorded.

w; Time indicator

Displays the time when the tape was recorded.

Note

Data items ql and w; are displayed only when DATA CODE on the DISPLAY SET menu has been set to DATE.

wa LCD monitor brightness

This is displayed when you adjust the LCD monitor brightness by rotating the SEL/PUSH EXEC dial. This display disappears in one second after you adjust the brightness. You can adjust the LCD monitor brightness when you have set the DISPLAY (MENU/TC/ AUDIO) selector to TC and the DISPLAY (LCD OFF/ OFF/ON) selector to OFF or ON.

Overview 1 Chapter

Chapter 1 Overview

19 (GB)