Overview 1 Chapter

Location and Function of Parts

2CONTROL connector

You can connect most of the LANC1) devices to this connector. On a regular LANC connector, you can only switch to the recording mode from the stop mode. This unit has an extended function that allows you to switch to the recording mode directly from the playback, fast-forward, rewind, slow-play, still, cue and review modes.

Notes

•You cannot control the power on/off of the unit from a LANC device connected to the CONTROL connector.

•The CONTROL connector of this unit has only LANC-S functions. This unit has no LANC-M functions.

Top Panel

1 Battery cover

2Battery cover lock

1Battery cover

You can open the cover when you attach/remove the battery into/from the battery compartment.

2Battery cover lock

Unlock when you open the battery cover.

For details on how to install a battery pack, see “Using the

BP-L40(A)/L60A/L90A Battery Pack” on page 32 (GB).

..........................................................................................................................................................................................................

1)LANC (Local Application Control bus system): Bidirectional interface to control a consumer VCR.

30 (GB)

Chapter 1 Overview