Operating the Menus

Menus Through Setting and Adjusting 6 Chapter

Icon/Menu

Submenu

Setting

(page)

 

 

 

 

V VIDEO SET

VIDEO LVL Adjusts the video signal levels.

 

(page 67 (GB)) INPUT: Adjusts the input video signals. (This is available only when the EE pictures are

 

 

output and the mode is stop, record, recording pause, fast-forward or rewind. This is

 

 

disabled for DV input.)

 

 

PB OUTPUT: Adjusts the output video signals. (This is available only when the mode is

 

 

playback, playback pause, slow playback, cue, or review.)

 

 

RETURN: Exits the menu without adjusting video signal levels.

 

 

Adjusting the input video signals

 

 

LUMINANCE: Adjusts the luminance level of the composite signals.

 

 

CHROMA: Adjusts the chrominance level of the composite signals.

 

 

HUE: Adjusts the hue of the composite signals. (only for DSR-50)

 

 

Y LVL: Adjusting the Y signal level of the camera component signals.

 

 

R-Y LVL: Adjusting the R-Y signal level of the camera component signals.

 

 

B-Y LVL: Adjusting the B-Y signal level of the camera component signals.

Notes

•This item is disabled for DV input. (You cannot adjust the DV input signals.)

•Adjust the signal levels by looking at the bars. (The triangles under the bars are displayed in green when the settings are set to the factory preset values.)

•All factory preset values are their center value.

•LUMINANCE, CHROMA and HUE can be adjusted only for VIDEO/REF. IN, camera composite or S VIDEO input while in the EE mode.

•Y LVL, R-Y LVL and B-Y LVL can be adjusted only for camera component signal input while in the EE mode.

Adjusting the output video signals

SETUP: Switches the luminance signal setup level (0% or 7.5%). (This item is only for DSR-50. The setup level for DSR-50P is fixed to 0%.)

Y LVL: Adjusts the Y signal level of the component signals. (If you change this, the Y signal level of the composite video and S VIDEO will also be changed.)

R-Y LVL: Adjusts the R-Y signal level of the component signals. (If you change this, the chrominance level of the composite video and S VIDEO will also be changed.)

B-Y LVL: Adjusts the B-Y signal level of the component signals. (If you change this, the chrominance level of the composite video and S VIDEO will also be changed.)

CHROMA: Adjusts the chrominance level in the composite signals.

Notes

•You can adjust the video levels only while playing the tape.

•Adjust the video levels by looking at the bars (except SETUP). (The triangles under the bars are displayed in green when the settings are set to the factory preset values.)

•The SETUP default is 0%. Other defaults are their center values.

•The output video signals can be adjusted only for VIDEO OUT2, COMPONENT OUT, or S VIDEO OUT.

•Set SETUP to 7.5% only if the tape has been recorded at 0% and you want to play back the tape at 7.5%. If you play back a 7.5% tape at the 7.5% setting, the tape will not be played at the proper brightness. If you set SETUP at 0% and if you play back a 7.5% tape, the tape will be played at 7.5%. (You cannot play the tape at 0%.)

86 (GB) Chapter 6 Adjusting and Setting Through Menus