1 Set the DISPLAY (LCD OFF/OFF/ON) selector to ON, and the DISPLAY (MENU/TC/AUDIO) selector to MENU.
The LCD monitor displays the menu. If you turn the SUPERIMPOSE switch on, the menu is also displayed on the VIDEO OUT1 output.
TC ⁄ UB SET
TC TC PRESET
CM UB PRESET
DISP TC FORMAT
VTC RUN A TC ⁄ UB IN
LCD TC MAKE
VTR UB TIME
ETC JOG TC OUT
(The TC FORMAT submenu is only for
2 Rotate the SEL/PUSH EXEC dial to select TC/UB SET, then press the dial.
The following menu appears.
TC ⁄ UB SET
TC 
TC PRESET 00:00:00:00
CM UB PRESET
DISP TC FORMAT
VTC RUN A TC ⁄ UB IN
LCD TC MAKE
VTR UB TIME
ETC JOG TC OUT
RETURN
3 Rotate the SEL/PUSH EXEC dial to select TC PRESET, then press the dial.
The following menu appears.
|
|
|
|
|
|
|
| TC ⁄ UB SET | 00:00:00:00 | ||
| TC | TC PRESET | |||
| CM | UB PRESET |
|
|
|
| DISP | TC FORMAT |
| RESET | |
| V | TC RUN |
| PRESET | |
| A | TC ⁄ UB IN |
| RETURN |
|
| LCD | TC MAKE |
|
|
|
| VTR | UB TIME |
|
|
|
| ETC | JOG TC OUT |
|
|
|
|
| RETURN |
|
|
|
|
|
|
|
|
|
4 Rotate the SEL/PUSH EXEC dial to select PRESET, then press the dial.
The following menu appears.
|
|
|
|
|
|
|
| TC ⁄ UB SET | O O | O | O |
| TC | TC PRESET | |||
| CM | UB PRESET | 00:00:00:00 | ||
| DISP | TC FORMAT | o o | o | o |
| V | TC RUN | SET |
|
|
| A | TC ⁄ UB IN | CANCEL |
| |
| LCD | TC MAKE |
|
|
|
| VTR | UB TIME |
|
|
|
| ETC | JOG TC OUT |
|
|
|
|
| RETURN |
|
|
|
|
|
|
|
|
|
5 Set the first two digits. Rotate the SEL/PUSH EXEC dial to select the number, then press the dial.
6 Repeat step 5 to set the other digits.
7 Rotate the SEL/PUSH EXEC dial to select SET, then press the dial.
The initial time code value is set and the menu display returns to step 2.
8 Rotate the SEL/PUSH EXEC dial to select 
RETURN, then press the dial.
The menu display returns to step 1.
To cancel the time code setting
Select CANCEL in step 7, then press the SEL/PUSH EXEC dial.
To reset the time code
Select RESET in step 4, then press the SEL/PUSH EXEC dial.
To set the value of the user bits
You can set the user bits as
Notes
•The user bits can be set only in a DVCAM format recording. It cannot be set in a DV format recording.
•Before setting the user bits, set the TC/UB IN on the TC/UB SET menu to INTERNAL and UB TIME to OFF.
For details on TC/UB IN and UB TIME, see “TC/UB SET menu” on page 78 (GB).
Signals Video the Adjusting and Code Time the Setting 4 Chapter
Chapter 4 Setting the Time Code and Adjusting the Video Signals 57 (GB)