Signals Video the Adjusting and Code Time the Setting 4 Chapter
5 Play back a tape from this unit after setting EXT SYNC on the VIDEO SET menu to ON.
6 Press the A channel button on the vectorscope.
The vectorscope displays the sync phase and subcarrier phase (composite signals only) of the signal from this unit.
7 Adjust the SYNC control using H PHASE on the VIDEO SET menu for rough adjustment, then adjust H PHASE F for fine adjustment, so that the output from this unit on channel (A) is in correct phase alignment with the black burst signal on channel (B).
8 Adjust the SC control using SC PHASE on the VIDEO SET menu for rough adjustment, then adjust SC PHASE F for fine adjustment, so that the output from this unit on channel (A) is in correct phase alignment with the black burst signal on channel (B).
(for NTSC) |
|
| ||
This indicator |
|
|
| This indicator |
moves as you |
| |||
| ||||
adjust the H |
| moves as you | ||
PHASE or H |
| adjust the SC | ||
PHASE F menu. |
| PHASE or SC | ||
|
|
|
| PHASE F menu. |
Adjust the sync and subcarrier phase of the output signal from this unit.
(for PAL) |
|
| ||
This indicator |
|
|
| This indicator |
moves as you |
| |||
| ||||
adjust the H |
| moves as you | ||
PHASE or H |
| adjust the SC | ||
PHASE F menu. |
| PHASE or SC | ||
|
|
|
| PHASE F menu. |
Adjust the sync and subcarrier phase of the output signal from this unit.
Note
When component signals are used, the subcarrier phase indicator does not appear.
66 (GB) Chapter 4 Setting the Time Code and Adjusting the Video Signals