Overview 1 Chapter
Location and Function of Parts
•The superimposed data output to the LCD monitor and the VIDEO OUT1 are the same. You cannot display a different superimposed data.
•The adjustment of VIDEO LVL on the VIDEO SET menu does not affect the VIDEO OUT1 output and return signal to the camera.
•If the unit is externally synchronized, jitters may appear in the VIDEO OUT1 connector output and the LCD monitor image because the sync signal frequency and the burst signals are not synchronized. If the unit is externally synchronized, use the VIDEO OUT2 connector. If you use the VIDEO OUT1 connector, set EXT SYNC on the VIDEO SET menu to OFF.
2INPUT SELECT selector
You can select DV, VIDEO, S VIDEO or CAMERA to input the signals. The selected input is displayed on the TC screen of the LCD monitor.
Notes
•When inputting signals from the DV IN/OUT connector, the following settings are disabled:
–Video input level
–Audio input selectors (CAM/LINE/+48V ON)
–Audio input level control selectors
–Audio recording level
–Audio recording mode (AUTO/MANU)
–Audio mode (32 kHz/48 kHz)
–Audio AGC (Auto Gain Control)
–Wind noise reduction
–Audio limiter
–You cannot display the color bars.
•If you change this selector, the screen may momentarily become bright or noise may appear. This noise will be recorded.
3SUPERIMPOSE switch
Turn on this switch to superimpose text data onto the output from the VIDEO OUT1 connector.
Note
The return signal to the camera is the same as the output from the VIDEO OUT1 connector.
4S VIDEO IN/OUT connectors
5VIDEO/REF.IN (reference input) connector
Inputs composite video signals to this unit. When performing a playback synchronized with the external sync signal, this connector inputs reference video (black burst) signal.
6VIDEO OUT2 connector
Outputs composite video signals. The text data is not superimposed.
7COMPONENT OUTPUT Y,
Outputs component video (Y,
26 (GB) | Chapter 1 Overview |