Location and Function of Parts

Right Panel

3TC IN/OUT connectors

Overview 1 Chapter

2PHONE LEVEL control knob

1PHONES jack

qaMONITOR SELECT selector

4DV IN/OUT connector

1Video signal input/output section (see page 25 (GB))

2Audio signal input/output section (see page 27 (GB))

5BREAKER button

6 DC IN 12V connector

8REMOTE connector

9CONTROL S connector

7 CAMERA connector

0AUDIO MONITOR OUT jack

1PHONES (headphones) jack (stereo phone jack) Connects to the headphones. You can monitor the audio signals being recorded or played through the headphones. Select the audio signal you want to monitor by selecting the channels with the MONITOR SELECT selector qa.

Notes

•A warning tone is output on the headphone sound and return sound to the camera. A warning tone is not mixed on the signals output from the AUDIO MONITOR OUT and AUDIO OUTPUT jacks.

•By setting the BEEP on the OTHERS menu to MELODY, the selected melody beep sound is mixed on the headphone sound and the return sound to the camera when you operate the menu.

2PHONE LEVEL control knob

Adjusts the volume of the headphones that are connected to the PHONES jack 1 and the audio level of the return sound to the camera.

3TC (time code) IN/OUT connectors (BNC-type) Used to input or output the time code through these connectors.

TC IN connector: Connects to the time code output connector on the external devices such as a time code generator or a VCR. This connector is used to synchronize the internal time code generator of this unit with an external time code.

Note

The unit can read the time code input to this connector only when the time code is output at normal play speed.

22 (GB)

Chapter 1 Overview