Recording

This section describes the settings and operations to record on this unit.

For details on connection, see “Connections” on page 35 (GB).

Notes

•Before starting a recording session, set the clock on the unit so that the recording time can be written into the index signal. You can set the clock by setting the CLOCK SET on the OTHERS menu.

•If you use a source that is copyright protected, recording and operation may be restricted.

•During a recording, the tape transport control buttons (except STOP and PAUSE) are disabled to prevent the tape running mode from being changed by an incorrect operation. To disable the STOP and PAUSE buttons, set the KEY INH switch to ON after the unit starts recording. In this case, set the KEY INH switch to OFF first, then stop or pause the recording.

Recording Using an External Camera

Settings for recording

External camera

2

 

 

Right panel

3

5

6

1

4

DSR-50/50P

7

 

(recorder)

 

Recording and Playback 3 Chapter

(Continued)

Chapter 3 Playback and Recording

45 (GB)