Icon/Menu | Submenu |
| Setting | |||
(page) |
| |||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
A AUDIO SET | LIMITER |
| Turns the limiter on/off. | |||
|
|
|
| OFF | : No limiter | |
|
|
|
| ON: Uses the limiter. | ||
|
|
|
|
| ||
|
|
| Notes |
| ||
|
|
| • This setting is disabled when inputting signals from the DV IN/OUT connector. | |||
|
|
| • This setting is available only when you have set the AUDIO SELECT switches on the front | |||
|
|
|
| panel to MANU. | ||
|
|
| • Make sure to set the audio input level control selectors on the right panel correctly. Even if | |||
|
|
|
| you have set this item to ON, the limiter will not work for a sound that exceeds the dynamic | ||
|
|
|
| range of the input amplifier. | ||
|
|
|
|
|
|
|
| WIND |
| Enables/disables the wind noise reduction function for microphones. | |||
| (page 21 (GB)) |
| You can set the wind noise reduction for audio channels 1 to 4 separately. If you select this | |||
|
|
| item, the channel to which the noise reduction is currently applied is displayed. (Example: If | |||
|
|
| noise reduction is applied to channels 1 and 3, “CH1,3” is displayed. If all channels are set | |||
|
|
| to OFF, “OFF” is displayed.) | |||
|
|
|
| OFF | : No wind noise reduction | |
|
|
|
| ON: Wind noise reduction | ||
|
|
| If you press the SEL/PUSH EXEC dial, the channel names are displayed. Select the | |||
|
|
| channel to be changed, change the setting, then press the SEL/PUSH EXEC dial. | |||
|
|
|
| |||
|
|
| Note |
| ||
|
|
| This setting is disabled when inputting signals from the DV IN/OUT connector. | |||
|
|
|
|
|
|
|
LCD SET menu
Icon/Menu | Submenu | Setting | |
(page) | |||
|
| ||
|
|
| |
LCD LCD SET | LCD BRIGHT | Adjusts the LCD monitor brightness. Rotate and press the SEL/PUSH EXEC dial to adjust | |
|
| and set the brightness. You can also adjust the brightness by rotating the SEL/PUSH EXEC | |
|
| dial on the TC screen. (The triangle under the bar is displayed in green when the setting is | |
|
| set to the factory preset value.) | |
|
|
| |
| LCD COLOR | Adjusts the depth of color of the LCD monitor. Rotate and press the SEL/PUSH EXEC dial | |
| (for | to adjust and set the depth of color. (The triangle under the bar is displayed in green when | |
| LCD COLOUR | the setting is set to the factory preset value.) | |
| (for |
| |
|
|
|
Menus Through Setting and Adjusting 6 Chapter
Chapter 6 Adjusting and Setting Through Menus 89 (GB)