Recording and Playback 3 Chapter
Recording
6 Select the audio input level adjustment mode in the AUDIO SELECT switches.
Note
You cannot adjust the recording level if you record signals input from the DV IN/OUT connector.
7 If necessary, adjust the audio input level by turning the audio recording level control knobs.
You can adjust the recording level with the audio recording level control knobs if you have selected MANU in step 6. While looking at the audio level meters on the LCD monitor or the display window, turn the audio recording level control knobs and adjust the recording level. Adjust the audio recording level so that the recording level does not exceed 0 dB when the audio signal is at its maximum. If the recording level exceeds 0 dB, the OVER indicators light.
Recording Procedure
2
1
3
1 After checking that the REC/SAVE switch of the cassette is set to the write enabled position and checking the tape for slack, hold the cassette so that the tape window is facing upward, then insert it into this unit.
The cassette is automatically loaded into the unit and the tape will stop.
For details of the REC/SAVE switch and checking the tape for slack, see “Notes on Video Cassettes” on page 40 (GB).
50 (GB) | Chapter 3 Playback and Recording |