Recording Using the Player

Settings for recording

2

Player (DSR-40/40P, etc.)Right panel

3

5 6

1

4

DSR-50/50P

7

(recorder)

1 Turn on the POWER switch.

2 Select an input signal by switching the INPUT SELECT selector.

DV: to record input signals from the DV IN/OUT connector

VIDEO: to record input signals from the VIDEO/REF.IN connector

S VIDEO: to record input signals from the S VIDEO IN connector

3 Set up the player to play back a tape.

For details, refer to the instruction manual of the player.

4 Set the audio input selectors to LINE.

Note

You do not need to set these selectors if you record signals input from the DV IN/OUT connector.

5 Set the audio input level control selectors properly according to the audio level of the player.

(Continued)

Recording and Playback 3 Chapter

Chapter 3 Playback and Recording

49 (GB)