The audio screen shows the following symbols depending on the menu settings, etc.
:Audio dubbing symbol
This symbol appears with a channel on which you can dub sound. You can select a channel to dub the sound in the AUDIO DUB on the AUDIO SET menu.
This symbol appears during playback of a tape recorded in 32 kHz of the DVCAM format.
This symbol also appears during audio dubbing on a tape recorded in 32 kHz of the DVCAM format. This symbol does not appear when the INPUT SELECT selector is set to DV.
:Wind noise reduction symbol
This symbol appears with a channel in which the WIND on the AUDIO SET menu has been set to ON.
:Link symbol
If the AGC (Auto Gain Control) of a pair of channels is linked, this symbol is placed between the channels.
If AGC CH1, 2 on the AUDIO SET menu have been set to LINKED and channels 1 and 2 in the AUDIO SELECT switch have been set to AUTO, channels 1 and 2 can be linked for AGC operation and for stereo sound where channel 1 is set for the left sound and channel 2 is set for the right sound. If AGC CH3, 4 on the AUDIO SET menu have been set to LINKED and channels 3 and 4 in the AUDIO SELECT switch have been set to AUTO, channels 3 and 4 can be linked for AGC operation and for stereo sound where channel 3 is set for the left sound and channel 4 is set for the right sound.
Note
This symbol does not appear when inputting signals from the DV IN/OUT connector.
:Camera symbol
This symbol appears at the right side of the LVL display when the INPUT SELECT selector is set to other than DV and the audio input selector is set to CAM.
Overview 1 Chapter
Chapter 1 Overview | 21 (GB) |