Operating the Menus
Menus Through Setting and Adjusting 6 Chapter
VTR SET menu
Icon/Menu | Submenu | Setting | ||||||||
(page) | ||||||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
VTR VTR SET | FF/REW SPD | Selects the tape transport mode in | ||||||||
|
|
| FF/REW | : | ||||||
|
|
| picture. |
|
|
| ||||
|
|
| SHUTTLEMAX: | |||||||
|
|
| normal speed for the | |||||||
|
|
| displaying the picture. | |||||||
|
|
|
|
|
|
|
|
|
| |
| STILL TIME | Selects the time to switch to the tape protection mode from the still mode. | ||||||||
|
|
| 30 SEC: 30 seconds | |||||||
|
|
| 1 MIN | : 1 minute | ||||||
|
|
| 2 MIN: 2 minutes | |||||||
|
|
| 3 MIN: 3 minutes | |||||||
|
|
| 5 MIN: 5 minutes | |||||||
|
|
|
|
|
|
|
| |||
|
| Notes |
|
|
|
|
| |||
|
| • If the unit is left in playback pause mode for a long time, the tape or the video heads may | ||||||||
|
|
| be damaged or the video heads may become clogged. Select the shortest time possible | |||||||
|
|
| — particularly when using a | |||||||
|
|
| SEC or 1 MIN. | |||||||
|
| • When the setting is changed, the first tape protection mode change uses the time setting | ||||||||
|
|
| from before the settings were changed. From the second tape protection mode change, | |||||||
|
|
| the new time setting is used. | |||||||
|
|
|
|
|
|
| ||||
| FROM STILL | Selects the tape protection mode to change the mode from the still mode. | ||||||||
|
|
| STEP FWD | : Forwards one frame. | ||||||
|
|
| STOP: Stops the tape. | |||||||
|
|
|
|
|
| |||||
| FROM REC | Switches the tape protection mode that the system changes to after the recording has been | ||||||||
| P | paused for more than five minutes. | ||||||||
|
|
| STOP |
| : Stops the tape. | |||||
|
|
| REC PAUSE: Maintains the recording pause mode. |
Notes
•The unit changes to the stop mode after the recording has been paused for more than five minutes when you select STOP. In this case you cannot start recording with the VTR button on the camera. Repeat the procedure from step 2 on page 47 (GB) to start recording again.
•When the recording pause mode continues for a long time after you select REC PAUSE, the tape may be damaged or the video heads may be damaged or clogged. If there is no other reason to do this, select STOP. Particularly when you use a
DUPLICATE | Switches the duplicate mode. | ||
(page 70 (GB)) |
| AUTOq : Starts duplication after rewinding the tape to the beginning in the player and | |
|
| recorder. (The cassette memory is also duplicated.) | |
|
| AUTOq: Starts duplication after rewinding the tape to the beginning in the player and | |
|
| recorder. (The cassette memory is not duplicated.) | |
|
| MANUALq | : Duplicates the tape from any point. (The cassette memory is not |
|
| duplicated.) |
|
Note
You cannot display the setting selection screen during duplication.
90 (GB) Chapter 6 Adjusting and Setting Through Menus