Operating the Menus

Menus Through Setting and Adjusting 6 Chapter

AUDIO SET menu

Icon/Menu

Submenu

Setting

(page)

 

 

 

 

 

 

 

 

A AUDIO SET AUDIO

Selects the audio mode.

 

MODE

 

FS32K

: Switches the audio mode to the four channel mode (12-bit mode).

(page 74 (GB)) FS48K: Switches the audio mode to the two channel stereo mode (16-bit mode). (This setting records the sound in all audio ranges, providing a high-quality sound recording.)

Notes

•This item is disabled when inputting signals from the DV IN/OUT connector.

•You cannot display the selection screen while in the recording mode.

•Noise may occur at the moment you switch the audio mode.

AUDIO DUB Selects the input channel for audio dubbing. (page 74 (GB)) CH1,2: Selects channels 1 and 2.

CH3,4 : Selects channels 3 and 4.

OFF: Disables audio dubbing.

Note

You cannot display the selection screen while dubbing the sound.

JOG AUDIO Turns sound output on/off when the tape is played at a speed other than normal.

OFF : Does not output the sound when playing a tape at a speed other than normal.

ON: Outputs the sound when playing a tape at a speed other than normal.

Note

Even if you have set this item to ON, the sound may not be output or interrupted depending on the tape format or tape conditions.

REF LEVEL Switches the center levels of the audio level meters displayed on the FINE screen. (page 20 (GB)) – 12dB: Sets the level to – 12 dB

–18dB: Sets the level to – 18 dB

–20dB: Sets the level to – 20 dB

Notes

•The default is – 20 dB for DSR-50; – 18 dB for DSR-50P.

•The standard output level of the AUDIO OUTPUT jacks is – 10 dBu. This is equivalent to

– 20 dB for DSR-50, or – 18 dB for DSR-50P from full bit (maximum audio level). This level is fixed and does not change even if you change the REF LEVEL setting.

•Changing this level does not change the audio gain of this unit. Turn the audio recording level control knobs to adjust the recording level accordingly.

AGC CH1,2 Links/separates the AGC (Auto Gain Control) in channels 1 and 2.

(page 21 (GB)) SEPARATE : AGC is not linked. (Channels 1 and 2 sound gains are separated.) LINKED: AGC is linked. (Channels 1 and 2 sound gains are linked as a pair.)

Notes

•This setting is disabled when inputting signals from the DV IN/OUT connector.

•The LINKED setting is enabled after you set the AUDIO SELECT switches on the front panel to AUTO for both channels 1 and 2.

AGC CH3, 4 Links/separates the AGC (Auto Gain Control) in channels 3 and 4.

(page 21 (GB)) SEPARATE : AGC is not linked. (Channels 3 and 4 sound gains are separated.) LINKED: AGC is linked. (Channels 3 and 4 sound gains are linked as a pair.)

Notes

•This setting is disabled when inputting signals from the DV IN/OUT connector.

•The LINKED setting is enabled after you set the AUDIO SELECT switches on the front panel to AUTO for both channels 3 and 4.

88 (GB) Chapter 6 Adjusting and Setting Through Menus