Change text in this variable definition to document title.

Connecting to a LAN

You can connect your notebook to 10Base-T and 100Base-TX-type Local Area Networks (LANs). For the detailed settings and devices needed to connect to the network, ask your network administrator.

Connecting to LAN

Ethernet port

Warning: Only connect 10Base-T and 100Base-TX cables to the Ethernet port. Do not connect any other type of network cable or any telephone line. Connecting cables other than those listed above may result in an electric current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the unit to the network, contact your network administrator.

If you enable Wake on LAN, the power saving mode will be switched to Standby mode.

To set up your ethernet connection

To connect to the network

1Click Start, select My Computer, and click My Network Places under the Other Places header.

2Click “Add a network place” under the Network Tasks header, or click “Set up a home or small office network,” depending on your configuration.

3Depending on your choice, either the The Add Network Place Wizard or Network Setup Wizard is displayed.

42

Page 42
Image 42
Sony PCGA-UMS1 manual Connecting to a LAN, To set up your ethernet connection, Connecting to LAN