Preliminary Layla850 P1B
To let another device initiate pairing with your P910a
1.In Control panel > Connections > Bluetooth > Settings, set Bluetooth to On.
2.Follow the other device’s manual to initiate pairing.
3.When asked for a passcode, enter the same on both devices.
4.If in the future you want to allow a paired device to connect
to your P910a without you explicitly approving each connection you should select
Bluetooth > Devices, select a device and the check box Allow to
connect without confirmation.
Tip You can change the name of a paired device. When you pair with other Bluetooth wireless technology enabled phones, it is very useful to include the user's name as part of the device name. This will make it very easy to beam information to the desired recipients.
To let a headphone initiate pairing with your P910a
1.Check that the device you want to pair with your P910a:
–Is on and within range.
–Has its Bluetooth function activated and that it is in visible mode.
2.In Control panel > Connections > Bluetooth > Settings, set
Bluetooth to On.
3.Follow the headphone’s manual to initiate pairing on the headphone.
4.In the Devices tab tap Add. Your P910a searches for all devices in the vicinity and lists them.
5.When asked for a passcode, enter the headphone’s passcode on your P910a.
6.If in the future you want to allow the headphone to connect to your P910a without you explicitly approving each connection, you should select Control panel > Connections > Bluetooth > Devices, select the headphone and the check box
Allow to connect without confirmation.
To remove a paired device from your P910a
Select a device in the list and select Remove.
Passcodes
Passcodes ensure that the device you pair with really is the device you think it is. A passcode is a set of numbers and/or letters (at least four characters) that you agree to exchange with the owner of the other device. Simply agree a passcode with the other user and each enter the same code into both devices when asked for it. The actual code is up to you; the important thing is that you both enter the same code. Accessories like headsets often have a default passcode, usually ‘0000’, see the specific user guide.
136 Connecting to other devices
