
Preliminary Layla850 P1B
To set up a Dial-Up entry for CSD or HSCSD
1.On the PC, open the Control Panel.
2.Choose to install a new modem.
3.Choose your P910a as the modem.
4.Select the port where the P910a is connected.
5.Confirm the selection. A new DUN connection has been created.
Connecting
To connect using a DUN entry created by the wizard
1.If you are connecting by cable, set your P910a to Modem cable connection mode, see ‘Cable’ on page 152.
2.Use any conventional method to make a connection:
–Click the Desktop shortcut created by the wizard.
–Select the entry from within the system DUN folder.
–Run an application that has
A combined signal strength and GPRS signal icon provides information on the GPRS service status. The GPRS connection status appears above the signal strength icon. There are three states for the icon, unavailable , available
and attached
.
The HSCSD/CSD and GPRS
icons are displayed during a data connection. Where GPRS is suspended, for example, the GPRS suspended state is indicated by a combined icon
.
There are three states for the GPRS icon: Active , active transferring data (alternates between
and
) and suspended
. Any data transfer either received or sent activates the GPRS active icon for 5 seconds.
Connection information
When you select the data connection icon, during an active data connection, a menu appears with the choices Information and
Disconnect.
•Select Information to view information on the connection.
•Select Disconnect to end the connection.
GPRS - connection information
Icons on the status bar let you overview the information on data connection calls.
GPRS status information
When the signal strength icon is selected, network, GPRS status information and, if applicable, GPRS error text appear.
Getting started with Internet and Messages | 175 |