Connector Assignments and Functions

2

 

 

2.4Feedback Sensor X30

The Feedback system generates a digital value, representing the rotor position

Derivated from this value:

commutation according to pole pair number actual speed value

position value for position control

2.4.1Function module X300

The connector X30 is directly related to the function module X300. This plug-in module (see chapter 1.4.3.1) determines the type of usable Feedback system.

Thus the 637f drive system gets flexibility and is adaptable to future requirements.

Types X300

Description

X300_RD2

Standard Resolver

X300_HF2

Option HIPERFACE→

X300_SC2

Option Sinus/Cosinus

Further types on reques

 

Plug and Play

The 637f identifies the type of the module X300.

The EASYRIDER→ Windows – Software loads the correct function code.

You follow the instructions in the EASYRIDER→ Windows – Software.

At function module RD2 the function code is already installed (factory default).

Note:

With application of the function module X300_HF2 (HIPERFACE®) please observe documentation 07-02-09-02-E-Vxxxx.

________________________________________________________________________________________________________________________________________________________________________________________________________________________

07-02-10-01-E-V0505.doc

Product Manaul Type: 637f

29