7 | Setting and Programming |
|
|
7.1Jumper
All jumpers are set to a standard position in production !
Layout of the Jumpers see: Chapter 1.2.3
JP100, |
|
bridged pad... |
|
2 and 3 | READY contact with reference to |
(standard) | common output supply voltage on |
| X10.21 |
1 and 3 | READY contact can be wired freely |
|
|
JP101, |
|
bridged pad... |
|
2 and 3 | Analog input X10.19 without internal |
(standard) | |
1 and 3 | Analog input X10.19 with internal Pull- |
| up to +12 V (FRR compatible) |
|
|
JP102, |
|
bridged pad... |
|
2 and 3 | X10.23 = active ok. output |
(standard) |
|
1 and 3 | X10.23 = GND internal |
| (FRR compatible) |
|
|
JP1, JP2 | adjust identically ! |
bridged pad... |
|
2 and 3 | X10.15 = |
(standard) |
|
1 and 3 | X10.15 = |
|
|
JP3, JP4 | adjust identically ! |
bridged pad... |
|
2 and 3 | X10.14 = |
(standard) |
|
1 and 3 | X10.14 = |
|
|
JP2.8, JP2.3 |
|
JP2.7, JP2.2 |
|
open | Default, RP CAN, RP DEV, RP PDP |
| RP 2CA, RP 2C8 |
close | RP 232, RP 422, RP 485, |
| RP IBS, RP EA5, RP SUC |
|
|
JP209 |
|
JP209 |
|
close | Default RP SBT |
Further connecting configuration see:
Product Manualo
7.2Digital communication
see: Chapter 13
________________________________________________________________________________________________________________________________________________________________________________________________________________________
60 | Product Manual Type: 637f |