2 | Connector Assignments and Functions |
|
|
2.5.1Incremental Output
EASYRIDER→ Windows - Software X40 Mode = 0
Incremental encoder simulation for processing in positioning modules Standard: 1024 increments
pulse duty cycle
further selectable pulse numbers: 2048, 512, 256, 128, 64, 4096
Inr. I/O X40
| PIN |
|
| Function |
|
| Designation |
|
|
| X40 |
|
|
|
|
|
| ||
|
|
|
|
|
| ||||
1 |
| Channel B | B |
| |||||
2 |
| Channel B inverted | /B |
| |||||
3 |
|
| Shield connector | Shield |
| ||||
4 |
| Channel A | A |
| |||||
5 |
| Channel A inverted | /A |
| |||||
6 |
|
| Reference * |
| GND |
| |||
7 |
|
| Channel Z inverted zero impulse |
| /Z |
| |||
8 |
|
| Channel Z, zero impulse |
| Z |
| |||
9 |
| Supply voltage output max. 150 mA |
| + 5 VDC |
| ||||
Design Rule:
The input frequency range of the connected control must meet at least the value of pulse output frequency on X40.
n = max. speed (rpm)
x = increments e.g. 1024
f = output frequency at X40.1,2,4,5
Formula: f = 1,2 * (n * x) = [Hz] 60
Example: n = 4000 1/min
f= 1,2 * (4000 *1024) = 81920 Hz 60
2.5.2
EASYRIDER→ Windows - Software X40 Mode = 1
Parameter range of the input signals: 10...1000000 increments
Figure:
Note:
The operation of incremental encoders via long cables may cause a voltage drop of the encoder power supply. We recommend the use of a separate voltage supply if necessary.
________________________________________________________________________________________________________________________________________________________________________________________________________________________
32 | Product Manual Type: 637f |