Star Micronics LC24-20 user manual Select graphics mode, III, n2, ml, m2

Select graphics mode

Mode

Std.

ASCII			Decimal			Hexadecimal
<ESC> “*”	M	n]	27	42 no	nl	1B	2A	/?0 n]
n2	ml	m2	n2	ml	m2	n2	ml	rn2 .,,

Selects one of eleven graphics modes depending on the value of nO and prints bit-image graphics in this mode. See <ESC> “K” (for 8- bit graphics) or <FS> “Z” (for 24-bit graphics) for information on

III, n2, ml, m2, . .

no Graphics mode

OX-bitNormal-density

1 8-bit Double-density

2 8-bit Double-density. double-speed 3 R-bit Quadruple-density

4 8-bit CRT graphics, mode I

6 8-bit CRT graphics. mode 11

3224-bit Normal-density

3324-bit Double-density ~g 24.bit CRT graphics

3924-bit Triple-density

4024-bit Hex-density

(60 dots per inch) ( 120dots per inch) (120 dots per inch) (240 dots per inch) ( 80 dots per inch) (90 dots per incb) ( 60 dots per inch) ( 120dots per inch) (90 dots per inch) ( 180dots per inch) (360 dots per inch)

Select graphics mode

Mode ASCII				Decimal			Hexadecimal
IBM	<ESC> “[” “g”	n]	/12	28	91 103 n/	}72	1B	5B	67 n/ /72
	rrl(l	m 1	n72	rn(l	ml m2	.	mo	ml	m2 ...

Selects one of eight graphics modes depending on the value of n~O and prints dot graphics in this mode. The graphics image is (nf + n2

x256) – 1 dots wide. See <ESC> “K” (for 8-bit graphics) or <FS> “Z” (for 24-bit graphics) for information on mI, n?2, ...

no Graphics mode

O8-bit Normal-density I 8-bit Double-density

2 8-bit Double-density. double-speed 3 8-bit Quadruple-density

8 24-bit Normal-density

9 24-bit Double-density

I I 24-bit Triple-density

12 24-bit Hex-density

( 60 dots per inch) ( 120dots per inch) ( 120dots per inch) (240 dots per inch) ( 60 dots per inch) ( 120dots per inch) ( 180 dots per inch)

(360 dots per inch)