Star Micronics LC24-20 user manual Functions of the EDS Settings, Off

FUNCTIONS OF THE EDS SETTINGS

The printer stores the parameters that you can select from the control panel while in the EDS mode.

A default is the setting that the printer will use if none is specifically selected by a program. When you first turn on or later reset your printer these default settings’will take effect. By changing the settings, you can alter various printer functions to match your specific requirements. The following will help you choose the proper settings.

Ban!-Switch]Function

A-1	Emulation
A-2	AEC Mode
A-3	RAM Usage
A-4	Auto LF with CR
A-5	Auto Sheet Feeder
A-6	Graphics Direction
B-1	(Not used)
B-2	I PaDer-out
B-3	I (Not‘ used)
B-4	(Reserved)
B-5	Printable Area
B-6	(Not used)
c-1	Print Mode
c-2
c-3
c-4	Page Length
c-5
D-1	Character Table
	(Standard mode)
	(IBM mode)
D-2	IBM Code page or
D-3	International
D-4	Character Set
D-5	CR Centering
E-1
E-2
E-3	LQ Font Selection
E-4
HE-5 f
F-1	EDS Setting

I ON	]OFF
I STANDARD/EPSONI IBM
Enabled	Disabled
Input Buffer	Download Buffer
Disabled	Enabled
Not installed	Installed
Bi-directional	Uni-directional
, Enabled	, Disabled
Leave ON
Type A	1 Type B
(See below)
(See below)
Graphics	Italics
Set #2	Set #l
(See below)
Disabled	Enabled
(See below)
I	Reset
Current

NOTE: The factory default is the “ON” position for all functions except A-6 which is set to the “OFF” position.

50