Printer does not feed paper

Probable Cause I Action

Paperisjamming. Remove all forms and pieces of paper.

Bailleveris closed Open the bail lever. Bail lever automatically closed when before paper goes the paper goes through the bail lever location. throughthe bail le-

ver location.

Adjustment lever Check the setting of the adjustment lever. See “Adjusting is set incorrectly. the printing gap” in Chapter 3.

Fanfold form is Move bail lever forward to unpark the fanfold paper. parked.

Line spacing is incorrect or overprinting occurs

Probable Cause Action

The tractor posi- Adjust the tractor positions. See “Loading fanfold forms” tions are incor- in Chapter 3.

rectly adjusted.

Incorrect emula- Select the other emulation with the EDS setting. See tion is selected. Chapter 5.

Problem with the Refer to your application program manual. application

pr6gram.

Platen knob was manually turned while the Power indicator was on.

Set the top of form. See “Top of form” in Chapter 4. Do not manually turn the platen knob when the power is on. Use the [ PAPERFEEDI button.

Forms are jam- ming between printing surface and the print head.

Reset adjustment lever. See “Adjusting the printing gap” in Chapter 3.

59

Page 67
Image 67
Star Micronics LC24-20 user manual