In this chapter we have learned many different commands that have many different uses. In the next chapter we will make up for this
But they are some of the most powerful that SR- lo/l5 offers. They give you the ability to create your own characters.
SUMMARY
Control code CHRS(7) <ESC> “Y” 0
<ESC > “Y” 1
<ESC > “y” 0
<ESC > “y” 1
<ESC > “@”
CHR$( 19)
CHRS(l7)
<ESC > “8”
<ESC > “9” <ESC> “<”
<ESC > “U” 1
<ESC > “U” 0 CHRS(8)
CHR$( 127) CHRS(24)
<ESC > “\” 1
<ESC > “\” 0 <ESC> “>” <ESC> “=”
<ESC > “#”
<ESC > “7” n
<ESC > “R” n
<ESC> “+” ..CHR$(30)
<ESC > “!”
<ESC > “?”
Function
Bell
Disable bell (for STAR mode) Enable bell (for STAR mode) Disable bell (for IBM mode)
Enable bell (for IBM mode) Reset
Print in one direction for one line only Unidirectional printing
Bidirectional printing Backspace
Delete character Cancel line
Print “zero” with slash Print “zero” without slash Eighth bit on
Eighth bit off Eighth bit
Select international character set (for STAR mode)
Select international character set (for STAR mode)
Define macro
Use macro (for STAR mode) Use macro (for IBM mode)
79
