Motion Computing M1400 manual Motion Desktop Stand, Motion FlexDock

Chapter 2 Motion Tablet PC Hardware

ACCESSORIES You can order the following accessories from the Motion Computing website at www.motioncomputing.com/accessories.

Motion Desktop Stand

The Motion Desktop Stand is an easel-like device that holds the Tablet PC in portrait or landscape modes. You can open the Desktop Stand to different widths to change the display angle: the wider you open the stand, the less the Tablet PC tilts back.

Motion FlexDock

The Motion FlexDock is a desktop docking station that provides a convenient interface for the Tablet PC. Its components are shown below:

		4	6
1	3	5	7	8	9	10
2						11

Motion FlexDock: (1) Back of FlexDock; (2) Front of FlexDock; (3) RJ-45/Ethernet;

(4)RJ-45 LEDs; (5) IEEE 1394; (6) USB; (7) Audio-in/Microphone Jack; (8) Audio- out/Headphone Jack; (9) External Monitor; (10) Power Jack; (11) USB

•Easily docks and undocks with the Tablet PC

•Adjusts to support the display from 0o to 90o for viewing and writing

•Automatically adjusts the display when you rotate the Tablet PC 90o between Primary Landscape and Primary Portrait

•“Grab-and-Go” capability lets you safely remove the Tablet PC from the FlexDock without turning the system off or putting it in

Stand by mode

NOTE: For more information about installing the FlexDock, see Chapter 4 of this

User Guide or the Installation Guide packaged with the FlexDock.

Motion Computing M1400 Tablet PC User Guide 18