Chapter 4 Using Your Motion Tablet PC
SETTING UP
THE UNIVERSAL
JACKS
SETTING UP
SPEECH
RECOGNITION
FOR DICTATION
Wide Focus
To configure the microphones for a single
1.Open the Motion Dashboard.
2.Under Audio, tap Wide Focus. The microphones now focus on a wider “angle of acceptance” than the Narrow Focus.
To train the microphones for dictation from a different “Wide Focus” angle, see “Focusing and Training the Microphones,” above.
Meeting/Conference
To configure the microphones for a meeting or conference room:
NOTE: This setting turns off the microphones’ “array processing/beam forming” software and disables the Training function.
1.Open the Motion Dashboard.
2.Under Audio, tap Meeting/Conference. The microphones now accept sound from all angles equally.
The Universal Jacks can be used interchangeably by microphones or headsets. To configure the jacks:
1. Tap the Universal Jacks icon in the
System Tray on the Tablet PC dis- play. The Sigmatel Controls menu appears.
2. Set the desired options.
To set up speech recognition for dictation:
1.Tap the Tablet PC Input Panel icon on the menu bar at the bottom of the Tablet PC display. The Tablet PC Input Panel appears.
2.Tap the
3.Tap Speech. The first time you access this function, a Speech Recognition Enrollment message appears suggesting that you take 10 minutes to adjust the microphone and train
speech recognition before continuing. Until you complete speech training, the speech buttons are inactive.
4.Tap Next and follow the Microphone Wizard.
NOTE: Initially, speech recognition will correctly recognize approximately 85%- 90% of the words you dictate. To further improve performance, run speech training sessions. Open the Windows Control Panel and select Speech to perform additional speech training. As you use this feature, accuracy gradually improves.
