MODEL ICB430 INSTALLATION INSTRUCTIONS
MODEL | HOME ALARM CONNECTIONS |
ICB430
Before the kickplate and grille are installed, all necessary wiring connections in the compres- sor compartment should be completed.
If a home alarm system is to be installed on the Wine Storage unit, the connections should be made using the logic supplied with the alarm specifications. See illustration 6 below for the appliance lead locations, and refer to the following for color codes:
Normally open contacts – white with red stripe wire
Normally closed contacts – white with blue stripe wire
Common – gray with white stripe wire
IMPORTANT NOTE: If you are not responsible for alarm system connection, this information should be supplied to the home security system contractor.
The alarm circuit in the unit is intended as
a
Any unused terminals should be completely insulated and all wires should be secured away from conductive or moving components.
Use the 6 mm spade terminals or wire nuts provided to make the proper wiring connec- tions.
Home Alarm |
Connections |
Illus. 6
28
