Configuring the Preinstalled Solaris 10 Operating System
Note – Before you perform this procedure, you need to set up the service processor. If you have not done so, see Chapter 2.
Use the information that you gathered in “Installation Worksheet” on page 32 as you perform the configuration.
After configuring the server module ILOM, you can configure the preinstalled Solaris 10 Operating System (OS) by using the service processor to connect to the system console.
▼To Configure the Preinstalled Solaris 10 OS
You can connect to the service processor using a serial terminal, or the Ethernet, as described in “Connecting to the Server Module ILOM” on page 13.
If you connect to the service processor using a serial terminal, you can use one of the following options:
■To capture the serial port output, on a client running Solaris OS, type: $tip
■On a client running the Windows OS, start a program such as Hyperterminal.
■On a client running the Linux OS, start a program such as Minicom, a
1.Connect and log in to the service processor using one of the methods described in “Connecting to the Server Module ILOM” on page 13.
The server module ILOM CLI prompt appears.
