JavaRConsole System Requirements
The requirements for the JavaRConsole system are:
■Solaris, Linux, or Windows operating system is installed.
■The system must be connected to a network that has access to the Sun Blade server module Ethernet management port.
■Java Runtime Environment (JRE) 6.0 or later is installed.
■If the JavaRConsole system is running on Solaris, volume management must be disabled for JavaRConsole to access the physical floppy and/or
■If the JavaRConsole system is running on Windows Server 2003 or Windows Server 2008, Internet Explorer Enhanced Security must be disabled.
■The JavaRConsole system and ILOM or ELOM service processor has been set up.
Setting Up the JavaRConsole System
This section describes how to setup the JavaRConsole system to deliver the mass storage drivers and operating system distribution media during a remote Windows installation. Follow the instructions that match your server’s configuration:
■“To Set Up the JavaRConsole System for Servers With ILOM” on page 20
■“To Set Up the JavaRConsole System for Servers With ELOM” on page 25
▼To Set Up the JavaRConsole System for Servers With ILOM
This section describes how to setup the JavaRConsole system using ILOM to deliver the mass storage drivers and Windows operating system distribution media during a remote Windows installation.
Note – This procedure assumes that the JavaRConsole system and ILOM service processor have been set up according to the instructions in the Integrated Lights Out Manager (ILOM) Administration Guide for your Sun Blade server module.
20 Sun Blade X6250 Server Module Windows Operating System Installation Guide • September 2008
