Sun Microsystems X6250 manual When you have made your selections, click Submit

11.From the Device Configuration window, select Floppy and/or CD-ROM according to the delivery method you have chosen.

■Floppy Disk Remote: Select Floppy to redirect the server to the contents of the physical floppy drive attached to the JavaRConsole system. This method may be used if you are installing the Windows Server 2003 on a Sun Blade X6250 server module equipped with a REM.

■CD-ROM Remote: Select CD-ROM to redirect the server to the operating system software CD/DVD contents from the CD/DVD-ROM drive attached to the JavaRConsole system.

■CD-ROM Image: Select CD-ROM Image to redirect the server to the operating system software .iso image file located on the JavaRConsole system.

Caution – Using the CD-ROM Remote or CD-ROM Image options to install the Windows Server 2003 or Windows Server 2008 will significantly increase the time necessary to perform the installation as the content of the CD-ROM is accessed over the network. The installation duration will depend on the network connectivity and traffic.

12.When you have made your selections, click Submit.

The devices are mounted and ready for the Windows install.

Proceed to the appropriate chapter for additional operating system installation instructions.

■To install Windows Server 2003, proceed to Chapter 6.

■To install Windows Server 2008, proceed to Chapter 7.

Chapter 5 Configure the JavaRConsole System 27