Net stop binlsvc net start binlsvc

Note – For readability, the OemPnpDriversPath information has been shown on multiple lines. The information must be entered on a single line.

TABLE 9-2Sun Blade X6250 Server Module .sif File Entries for Sun Blade RAID 5 Expansion Module

Windows Server 32-bit	Windows Server 64-bit

[Unattended]	[Unattended]
OemPreinstall = yes	OemPreinstall = yes
OemPnpDriversPath=“\Sun\Drivers\	OemPnpDriversPath=“\Sun\Drivers\
intel\chipset;\Sun\Drivers\intel\	intel\chipset;\Sun\Drivers\intel\nic;\
nic;\Sun\Drivers\adaptec;\Sun\	Sun\Drivers\adaptec;\Sun\Drivers\
Drivers\ast”	ast”
[MassStorageDrivers]	[MassStorageDrivers]
"Adaptec SAS/SATA-II RAID Controller	"Adaptec SAS/SATA-II RAID Controller
(32-bit)" = OEM	(64-bit)" = OEM
[OEMBootFiles]	[OEMBootFiles]
adpenc.cat	adpenc.cat
adpenc.inf	adpenc.inf
arc.cat	arc.cat
arc.inf	arc.inf
arc.sys	arc.sys
arcsas.cat	arcsas.cat
arcsas.inf	arcsas.inf
arcsas.sys	arcsas.sys
ramdisk1	ramdisk1
txtsetup.oem	txtsetup.oem

9.Stop and start the Remote Installation Service (BINLSVC) on the RIS server.

To do this, type the following commands at the command prompt and press Enter after each command:

Chapter 9 Incorporating Sun Blade X6250 Server Module Drivers Into WIM or RIS Images

Sun Microsystems X6250 manual Net stop binlsvc net start binlsvc