Lexmark 6500 Series manual Setup Troubleshooting, Incorrect language appears on the display

Troubleshooting

If you set up your printer on a wireless network, make sure:

•The wireless network is working properly.

•The computer and printer are both connected to the same wireless network.

•The printer is within the range of the wireless network. The effective range for optimal performance is generally 100–150 feet.

•The printer is located away from other electronic devices that may interfere with the wireless signal.

•The power supply is connected to the printer, and is lit.

•The Wi-Fi indicator light is green.

•The printer driver is installed on the computer from which you are performing a task.

•The correct printer port is selected.

Setup Troubleshooting

Incorrect language appears on the display

These are possible solutions. Try one of the following:

Change the language selection during initial setup

After you select a language, Language appears again on the display. To change the selection:

1Press or repeatedly until the language you want appears on the display.

2Press to save.

Select a different language after initial setup

1From the control panel, press Settings.

2Press or repeatedly until Device Setup appears.

3Press .

4Press or repeatedly until Language appears.

5Press .

6Press or repeatedly until the language you want appears on the display.

7Press .

8Press or until Yes appears.

9Press to save.

Note: If you cannot understand the language on the display, see “Resetting the printer to factory default settings” on page 172.

137