Lexmark 6500 Series manual From here, You can

From here

Maintenance

Paper Setup

Device Setup

Defaults

You can

Select:

•Ink Level to view the ink level of the color cartridge. Press or

to view the ink level of the black (or photo) cartridge.

•Clean Cartridges to clean the print cartridge nozzles.

•Align Cartridges to align the cartridge.

•Print Test Page to print a test page.

Select the size and type of paper loaded.

Select:

•Language to change the language setting.

•Country to set the default blank paper size, date format, number of Caller ID patterns, and region selection being used in your location.

•Date/Time to set the date and time.

•Host Fax Settings to choose whether to allow the fax software from the computer to make changes in your fax settings.

•Button Beep to set the volume of the tone when a control panel button is pressed to either On or Off. On is the default.

•Power Saver to set the number of minutes before the printer, if left unused, enters the Power Saver mode.

•Caller ID Pattern to choose from one of the following patterns available based on the country or region you selected during initial setup. If phones in your country use two detection patterns, call your telecommunications company to determine their subscribed pattern.

–Pattern 1 (FSK)

–Pattern 2 (DTMF)

For more information, see “Using Caller ID from the control panel” on page 116.

•Clear Settings Timeout to change the timeout feature before the printer, if left unused, resets to the factory default settings. For more information, see “Saving settings” on page 39.

Select:

•Photo Print Size to choose the size of photo(s) to print.

•Set Defaults to change default settings. For more information, see “Saving settings” on page 39.

41