Installing an internal wireless print server

The printer you purchased may contain an internal wireless print server that allows the printer to be used on a wireless network. If your printer does not have an internal wireless print server already installed, you can purchase one separately. Use the following instructions to install the internal wireless print server:

1Turn off your printer, and then unplug the power cord from the wall outlet.

Warning: Failure to unplug the printer can cause damage to your printer and to the internal wireless print server. Make sure the printer is turned off and the power cord is unplugged from the wall outlet before you proceed.

2Remove the back cover plate by pushing the tab down and then pulling the cover away from the printer.

2

1

3

3Unpack the internal wireless print server. Save the packaging materials.

Warning: Wireless print servers are easily damaged by static electricity. Touch something metal such as the printer frame before you touch the wireless print server.

4Align the edges of the internal wireless print server with the guides on the left and right, and then slide the wireless print server into the printer until it snaps into place.

5Make sure the antenna points up.

6Attach the adhesive label with the MAC address to the back of the printer. You will need this later to network the printer.

You are now ready to configure the internal wireless print server to work on your wireless network.

47

Page 47
Image 47
Lexmark 6500 Series manual Installing an internal wireless print server