Lexmark 6500 Series manual Cannot print from digital camera using PictBridge

3Click Printer.

•Make sure no check mark appears next to Pause Printing.

•If a check mark does not appear next to Set As Default Printer, you must select the print queue device for each file you want to print.

Reconnect power supply

1Press to turn the printer off.

2Disconnect the power cord from the wall outlet.

3Gently remove the power supply from the printer.

4Reconnect the power supply to the printer.

5Plug the power cord into the wall outlet.

6Press to turn the printer on.

Removing and reinstalling the software

Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the software” on page 141.

Cannot print from digital camera using PictBridge

These are possible solutions. Try one or more of the following:

Enable PictBridge printing from camera

Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital camera documentation.

Make sure the camera is a PictBridge-enabled digital camera

1Disconnect the camera.

2Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to determine whether it is PictBridge-enabled.

Check USB cable

Use only the USB cable that came with the camera.

Remove memory cards

Remove any memory cards from the printer.

Check messages

If an error message appears on the display, see “Error messages on the computer screen” on page 197.

Understanding Warning levels

•A green check indicates system requirements were met.

•A yellow question mark indicates system requirements were not met. Most major functions will work, but you may experience some performance impact.

•A red question mark indicates system requirements were not met. Most major functions may not work.

•A red X indicates system requirements were not met. Installation will not continue.

140